CVE-2022-50625

EPSS 0.0%
  • Published: 2025-12-08T02:15:48.510

In the Linux kernel, the following vulnerability has been resolved:

serial: amba-pl011: avoid SBSA UART accessing DMACR register

Chapter “B Generic UART” in “ARM Server Base System Architecture” [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.

When the kernel enables DMA engine with “CONFIG_DMA_ENGINE=y”, Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
…
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
—[ end trace 83dd93df15c3216f ]—
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon

This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.

[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html

Related CVE by CWE

No related CWE found.

Top CVE for Vendor

No vendor taxonomy on this entry.

Recently Exploited Similar Vulnerabilities

No recent KEV-listed items for this vendor/product.

How to fix CVE-2022-50625

CVE-2022-50625 is a unknown severity vulnerability affecting the affected product.

Description: In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: avoid SBSA UART accessing DMACR register Chapter “B Generic UART” in “ARM Server Base System Architecture” [1] documentation describes a generic UART interface. Such generic UART does not support DMA. In current code, sbsa_uart_pops and amba_pl011_pops share the same stop_rx operation, which will […]

Exploit Difficulty: HARD
⏱️ Time to exploit: > 4 hours
🛠️ Required skills: Advanced security expertise
💰 Public exploits: Rare or not public

How to Fix:

1 Identify affected systems

- Check if you're running the affected product

2 Immediate actions

- Update to the latest patched version
- If patching is not immediately possible: restrict network exposure, apply least-privilege access

3 Verification

- Test the fix in a staging environment first
- Review logs for signs of exploitation
- Monitor for IOCs (Indicators of Compromise)

4 Long-term prevention

- Enable automatic security updates
- Set up vulnerability monitoring
- Review and harden security configurations

Vendor Advisory: https://developer.arm.com/documentation/den0094/c/?lang=en

Exploit Difficulty Assessment

HARD
⏱️ Time to Exploit: > 4 hours
🛠️ Skills Required: Advanced security expertise
💰 Public Exploits: Rare or not public

Vulnerability Timeline

Dec 08, 2025
Vulnerability Published

CVE details first published to NVD database

Dec 08, 2025
Imported to Database

Added to this CVE tracking system

Detection Rules & IOCs

No specific detection rules generated for this vulnerability type.

No vendor/product data available.